A. The interface can be reset, when not connected via USB, by pressing and holding the programming button on the side of the interface for seven seconds until the LED turns amber. This reset can only be done while the module is connected to the vehicle.

What is a SWC wire?

SWC is an acronym standing for Steering Wheel Control. An SWC interface is a module that connects a vehicle’s OEM steering wheel controls with an aftermarket headunit or radio replacement unit.

How do I program my SWI RC 1?

Programming The Vehicle Version # 1. Press and hold programming button on the side of the SWI-RC, and turn the vehicle ignition to the ON position while still holding the button. The LED on the SWI-RC will turn on. Release the programming button and the LED will turn off.

What does W r mean on a Pioneer radio?

Take note that the steering wheel control jack for Pioneer radios is labeled “W/R”. For Sony radios it is a blue jack labeled “REMOTE”. • Any radio using a wire for SWC connection: Ensure the correct steering wheel control wire is used from the Female 3.5mm jack with stripped leads(included with ASWC-1).

How do I reset my PAC SWI RC?

A. The interface can be reset, when not connected via USB, by pressing and holding the programming button on the side of the interface for seven seconds until the LED turns amber. This reset can only be done while the module is connected to the vehicle. Q.

What are the key 1 and key 2 wires?

These radios’ SWC wires are often identified as KEY 1 and KEY 2, or SW 1 and SW 2. This enables you to connect your Panasonic, Android radio, or another radio brand to our PAC interface to retain steering wheel controls with the radio without having to modify our 3.5mm connector.

What color is SWC wire?

SWC Interface Wiring Each interface (either stand-alone or as part of a multi-function product) has one blue/yellow wire and one black wire with a stereo-type 3.5mm plug. Both wires accomplish the same purpose: transfering the SWC signals to the radio.

What is Mixtrax on a Pioneer radio?

MIXTRAX is an innovative Pioneer technology that creates a non-stop mix of your music library complete with a range of DJ-inspired effects. Drawing from Pioneer’s rich DJ heritage and our passion for music, MIXTRAX delivers a unique DJ infused listening experience to those in the car.

How do you program a pioneer?

1. Make sure you have working battries in remote.
2. Press the “Power” button on the television to turn it on.
3. Point the remote at the TV and press the “CATV”and “TV” keys at the same time. …
4. Press the “TV” key to program the television.

What is WR plug pioneer?

The WR-1 receiver plugs into the inputs of a remote subwoofer or amplifier. It is an ultra-compact module which can be placed hidden away behind other equipments. A non-slip silicon rubber base is designed to not mark or leave residue on surfaces.

Article first time published on

Why does nothing work on my steering wheel?

1. Power Steering Pump Failure. … If this component ever stops working, then it will become much more difficult to turn your steering wheel. This might mean that a piece has come loose and needs to be tightened, or it might mean that the pump needs to be replaced.

What is the button behind the steering wheel?

The remote sound system controls are located on the rear surface of the steering wheel. Reach behind the wheel to access the switches. The right-hand control is a rocker-type switch with a pushbutton in the center and controls the volume and mode of the sound system.

What do the buttons on my steering wheel mean?

The steering wheel of the vehicle has a number of controls on it so that the driver can change settings without ever looking away from the road. … The buttons on the wheels can switch between stations or station presets. They can also turn on “scan” mode on the radio. The volume can be adjusted as well.

What is a radio replacement interface?

Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.

What is reverse input wire?

The red wire passes the reverse signal up to the front of the car. The camera end has a red and black wire which the red wire gets connected to the reverse light and the black gets connected to ground.

What is a radio replacement and SWC interface?

An all-in-one radio replacement and SWC interface. Comes pre-loaded with amplifier retention and SWC software, navigation based output signals and other features that save time and money during installation. Built-in pre-programmed SWC retention. Retains factory amplifier. Provides factory reverse camera activation.

Can I use my steering wheel controls with an aftermarket stereo?

This subject is a little complicated, but the basic answer is that, no, you can’t connect steering wheel audio controls to an aftermarket radio without an adapter. … In most cases, though, an adapter is required.

What is SWC harness?

Axxess’ AX-FDSYNC-SWC harness allows you to connect the steering wheel audio controls in select 2015-up Ford Transit vehicles (if equipped) to a new car stereo without having to splice into your factory wiring.

What is key in wire on stereo?

Showing 1-10 of 32 answers. Hello. The Key 1, Key 2, and Key GND wires will be used to interface steering wheel controls if your vehicle came equipped. Most newer vehicles will also need the Axxess ASWC-1 to translate the steering wheel controls to this stereo.