Kilz product is thin but I believe it has a little more workability than Gardz. And no odors isn’t as strong either. Also price wise the Klear is about ten dollars cheaper a gallon. The Gardz seems to seal soft compounds to a harder finish but that could just be me.

Do I need to prime after using Gardz?

Gardz is more of a sealer, with glue like consistency. It’s clear and doesn’t do much to prime. You can try painting over it, but again it’s clear, so no help with covering stains or discoloration.

Can you mud over Gardz?

After applying and sanding your patches, coat the patches with Gardz – sometimes two coats of Gardz is optimal on raw mud to fully seal. Use the fan, as noted. Gardz will dry very fast on the raw sheet rock and mud, longer when applied to a sealed surface.

What is Gardz paint?

A unique water-based sealer for porous and potential problem surfaces. Gardz® is formulated to deeply penetrate and dry to a hard, moisture resistant film that seals and binds down porous, chalky and crumbling surfaces, paints and textured finishes.

How do you use Gardz problem surface sealer?

Apply GARDZ liberally to the entire surface using a brush, medium nap roller or sprayer, to ensure good penetration. Do not over apply or the coating will sag. GARDZ appears milky blue-white during the application but dries water clear. Properly sealed surfaces should have a uniform sheen.

Can I use Gardz over paint?

Top coating / Wallpapering– When dry, Gardz may be top coated with any standard architectural water-based or solvent-based primer or topcoat paint. Gardz is compatible with all types of joint compounds and spackling pastes and any texture or popcorn finish may be applied over it.

Can you use Gardz on concrete?

There are primers made for just concrete floors, but the surface must be clean and in sound condition first. Gardz is great for sealing bare drywall or using after paper removal.

Can I use Gardz over wallpaper?

Use an appropriate sealer for painting over wallpaper. Zinnser Gardz is a clear water based sealer. When applying zinsser gardz you do not need to put too much onto the roller as the product is very watery. Simply apply Zinnser Gardz to the wallpaper and let it dry. You only need a single coat.

How many coats of Gardz should I use?

So the guardz will do the best job sealing. Any high quality paint will hide in two coats over what you have there, so just do that.

What is Prime Surface Sealer?

ALLPRIME™ WATER-BASE PROBLEM SURFACE SEALER is recommended for sealing problem porous surfaces such as bare and damaged drywall, plaster, cement and cementitious coatings, spackling paste and joint compound, calcimine, stucco, acoustic and texture finishes, uncoated wallpaper, etc.

Article first time published on

Can Zinsser Gardz be used outside?

Use a stabilising solution or peel stop as peel stop can be used outside and gardz can’t.

Can I use Zinsser Gardz on MDF?

@p16 Used Gardz quite successfully and also Rustins MDF Sealer. Agree with the some of you about the fact it is water based may cause an issue and using something like Coverstain may be better.

Does Gardz smell?

Lock down porous and crumbling surfaces with Rust-Oleum® Zinsser® GARDZ® Problem Surface Sealer. This low-odor, water-based formula dries to a clear, matte finish, creating a hard, paintable seal over damaged drywall, adhesive residues and other chalky surfaces.

Does Gardz block stains?

Gardz will not deal with odors or stains as lilpaintchic already said.

Is Zinsser Gardz water based?

About Gardz® Problem Surface Sealer This low-odor, water-based formula dries to a clear, matte finish, creating a hard, paintable seal over damaged drywall, adhesive residues and other chalky surfaces.

Can you fill gaps in wallpaper?

You will likely need a few coats given the absorbency of lining paper. Never used the Red Devil filler, as above Easifill & Toupret, both excellent fine finish fillers, used them in the past for gap filling wallpaper, using a old credit card as a filler tool, give a nice smooth finish with little or no sanding needed.

How do you cover up wallpaper seams?

Cover the wallpaper seams with a thin layer of premixed joint compound. Apply the compound with a putty knife, then wet it with a sponge until it becomes more pliable. Smooth it as flat as possible with the putty knife, feathering out the edges of the compound to create an even surface. Allow the compound to dry.

Can you put clear varnish on wallpaper?

Clear varnish is definitely not suitable as a protective coating as it will result in a yellowing, greasy looking film and can react negatively with the wallpaper or even dissolve it.

What is Surface Sealer?

1. One that seals, as an undercoat of paint or varnish used to size a surface. 2. An officer who inspects, tests, and certifies weights and measures.

What is Zinsser Peel Stop?

Peel Stop is a clear, flexible, binding primer designed for surfaces that are peeling, chalking, or cracking. … Applied over cracked or crazed surfaces, Peel Stop acts as a flexible bridging primer to seal face crazing and prevent the finish coat from cracking, providing a sound surface for primer and paint.

How do you paint over peeling drywall?

Paint the Wall With Satin-Finish Paint Rinse out one of the 5-gallon buckets, then fill it halfway with satin-finish paint. Dip the roller into the bucket and roll it onto the drywall until the entire area is covered in an even coat. Apply additional coats as needed. Remove the painter’s tape before the paint dries.

What's the difference between Zinsser BIN and 123?

Bulls Eye 1-2-3 is Zinsser’s classic acrylic-based all-purpose primer, sealer and stain-killer. … Zinsser B-I-N is a shellac-based alternative to Bulls Eye 1-2-3 and is perfect for interior priming or for exterior spot priming.

Is Zinsser BIN breathable?

Zinsser Bulls Eye 123 primer is a universal water-based primer-sealer. … Zinsser Bulls Eye 123 has a breathable film, which lets interior house moisture escape, minimizing exterior paint blistering and peeling.

Which Zinsser is best?

Bulls Eye 1-2-3 is an outstanding all-purpose, all surface primer, which is great for all interior and exterior surfaces. Its unique acrylic, latex formula sticks to the glossiest surfaces and blocks difficult stains from appearing on your interior and exterior painted surfaces.

Can I use Zinsser BIN to Prime MDF?

You will be fine to use B I N as the primer.

What's the best primer for MDF?

Prime the MDF with a solvent-based primer, such as Zinsser (buy online) or KILZ (buy online). Avoid water-based primer, as it may cause the wood fibers to swell, resulting in a surface that appears to have a raised grain (no matter how much effort you put into sanding).

Does Zinsser BIN work on MDF?

At the shop we use a catalyzed primer that must be applied with specialized spray equipment in a ventilated booth with fire suppression. For smooth surfaces at home #1 is Zinsser Bin white pigmented shellac primer. …