A post pounder, post driver, post rammer, post knocker or fence driver is a tool used for driving fence posts and similar items into land surfaces. It consists of a heavy steel pipe which is closed at one end and has handles welded onto the sides. It is normally used by one person, but larger versions may require two.

What is fence post driver?

DBM IMPORTS Heavy Duty 3-1/2” x 24” Steel Post Driver T Post Metal Fence Pounder. 5.0 out of 5 stars 3. $105. 50.

Do fence post drivers work?

Anyone who’s used a sledgehammer to pound in dozens of steel fence posts will recognize the true value of a fence post driver – it’s faster, easier and a lot safer for setting fence posts and stakes.

What do you use to drive posts into the ground?

GAS POWERED POST DRIVERS Handheld post drivers tend to be the most convenient when it comes to driving fence posts into the ground. Gas powered post drivers are incredibly easy to use and extremely powerful.

How long is a post driver?

The driver is 78 inches long overall and weighs 30 pounds. The 38- inch-long barrel, which is 2 inches in diameter, allows a 36-inch stroke. The 13⁄8-inch-diameter handles extend down from the lower section of the barrel.

Who invented the post driver?

Inventor of Man Saver Post Driver Since 1998, Dan Rohrer’s innovative product has sold nearly 16,000 units. Starting a business from scratch is never easy, something that Dan knows well.

What is the best t post driver?

• Titan PGD2875 Gas Powered Post Driver.
• Skidril 2-stroke Gas Powered Post Driver.
• Rhino GPD40 Fence Pro Honda 4-stroke Gas Powered Post Driver.
• Titan PGD3875 4″ Barrel Post Driver.
• BSTOOL 2-stroke Gasoline Petrol Post Driver.
• Rhino Ranch Pro.
• Yescom 32.7cc 2-stroke.
• Rhino Multi Pro.

Do gas powered T Post drivers work?

A gas-powered post driver does most of the work for you! There isn’t much muscle power required. … Such projects can be exhausting with a manual driver, so a gas-powered model will save you a lot of effort.

How long do fence posts last?

While treated timber posts can last from anywhere between 10-15 years, untreated timber may need replacing in under 5 years. What’s more, rotting, splitting and warping (where the post expands upon water absorption) are all very common occurrences for wooden fence post systems.

What do post drivers do?

A post pounder, post driver, post rammer, post knocker or fence driver is a tool used for driving fence posts and similar items into land surfaces. It consists of a heavy steel pipe which is closed at one end and has handles welded onto the sides. It is normally used by one person, but larger versions may require two.

Article first time published on

Can you hammer at post?

Post less than 4 feet in overall length may be installed with a common hammer or sledgehammer. … Emergency repairs can also be completed using a hammer or sledge hammer.

How does a post knocker work?

Manual Post Drivers Are Human-Powered In essence, with a manual post driver, you lift and drop the “pounder” over top your post. The pounder has an open end that is more-or-less the diameter of a post, which fits within the hollow pounder. The end of the pounder is closed and the post strikes against it.

How does a hydraulic fence post driver work?

A hydraulic post driver is an apparatus used for forcing fencing posts into the ground. The equipment is first attached to a three-point hitch of a tractor. A fencing post is then fixed to it. Once fixed, an operator controls the hydraulic cylinders that force the post into the ground.

What is the difference between T post and u post?

Steel T-posts and U-posts are used exclusively with wire fencing. T-posts are shaped like the letter T, and U-posts are shaped like the letter U. … You can get away with a little more distance between posts if using barbed wire.

How deep do post holes need to be?

Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).

When was the post driver invented?

Shaver’s original products were water tank heaters and front end loaders for agricultural tractors. In 1955, the first post driver was engineered and introduced, the Model HD-6.

How long will treated 4x4 last in ground?

A treated 4×4 will last 20 to 25 years in the ground if the conditions in the soil and climate are favorable. That number could increase to 40 to 75 years if you install the treated 4×4 in a cement ring rather than the soil. There are a few factors that influence how long the 4×4 can last in the ground.

Do wooden fence posts rot?

Wooden fence posts tend to rot at ground level and this can happen surprisingly quickly, especially in damp poorly drained conditions, with the result that you might need to replace your expensive fence after just a few years, but it doesn’t have to be the case. … Postsavers can protect fence posts from rot for 25 years.

What are the different types of fence posts?

• Wood posts. Wood is by far the most popular post material. …
• Metal posts. These are made up of steel and are at times made using durable rail steel. …
• Aluminum posts. Source: Home Depot. …
• Vinyl. …
• Rebar. …
• Fiberglass. …
• Brick. …
• Granite.

What is the easiest fence to install?

The complexity of each type depends on the material used and how well it was installed. The quickest and easiest fence to install is with wood panels. The wood panels are not always the cheapest, but they save time rather than installing the rails and pickets separately.

Can you build a fence without concrete?

Backfilling the fence post hole with gravel is another common alternative to using cement. Start with a hole about the size of the one you’d dig if you were using cement, insert a third of the post’s length into the hole, and then fill with crushed gravel, tamping every five inches until flush.