Bigger than other household sinks, laundry room sinks are rectangular shapes that are both deeper and wider. They average around 23 inches in width, 20 inches in length, and 13 inches in depth. Size requirements for laundry room sinks are important, but you need to consider other factors before installation.

What is a good sink for a laundry room?

Stainless steel. Lightweight and easy to clean, stainless steel sinks can be a classic go-to for laundry and utility rooms. These sinks have a somewhat industrial look and feel that can be a perfect fit for a more utilitarian space.

What is the difference between a laundry sink and a utility sink?

What Is a Laundry Sink? Often called a utility sink, a laundry sink is a rugged, large-capacity sink used primarily for cleaning or soaking clothing. A laundry sink is also used for washing items unrelated to clothing such as paintbrushes.

How are laundry sinks measured?

To measure a utility sink, place the straightedge ruler across the top of the sink. With the use of a tape measure, measure the deepest part of the sink basin to the bottom edge of the ruler. When measuring under-mount sinks, also measure the height from the sink all the way to the countertop.

What size is a laundry sink drain?

However the drain size for a laundry sink needs to be 2″ in diameter. A laundry sink is sometimes referred to as a utility sink is often located in the same room as the washer and dryer. A laundry sink needs to be 2″ instead of 1.5″.

Is a sink necessary in laundry room?

The laundry room houses the washing machine, sinks, faucets, pipes, and many other plumbing fixtures and appliances. … Sinks are some of the most important fixtures in a laundry room. This is because we do a lot of washing in the laundry room and hence we need the sinks for this purpose.

How do you measure a utility sink?

Measure the sink width by placing your tape measure at the back edge of the sink (closest to the kitchen faucet) and stretching it across the sink basin to the front edge. Write down the width. Lastly, measure the basin depth. Place your straightedge ruler or your level across the top of your sink.

What is the height of a laundry tub drain?

Some are on legs and some you wall mount. Typically 18″ though.

How many Litres does it take to fill a sink?

The capacity varies considerably with depth. 20 liters is probably close to an average. Some will be much lower, and others much higher.

Will a kitchen faucet fit a laundry sink?

The standard spacing between the outermost of these holes is 8 inches, and the posts of the faucet have the same spacing. … If the spread on the laundry sink is 4 inches, your 2- or 3-post kitchen faucet won’t work.

Article first time published on

Can a laundry sink be used as a kitchen sink?

Since finished laundry areas have become popular in many homes, a lot of today’s high-end utility sinks are beautifully designed. Some of these utility sinks are referred to as “double-duty” sinks, because they can be used for both kitchen and laundry area installations.

Can I use kitchen faucet on laundry sink?

Your new laundry sink may have punch-outs for a laundry faucet, but if you’ll be installing a kitchen faucet, don’t use them.

What size is a sink drain pipe?

Some older sinks may have drains that connect to a 1 1/4-inch tailpiece, but most modern drains have a 1 1/2-inch outlet. All the pipes that connect to the tailpiece, including the P-trap assembly and all the horizontal extensions, are either 1 1/4 or 1 1/2 inches in diameter.

Are all bathroom sink stoppers the same size?

There is no universal drain hole diameter that applies to every bathroom sink, but 1 1/2 inches is the most common size for a bathroom sink drain opening, according to Signature Hardware. Some bathroom sinks have a slightly narrower opening at 1 1/4 inches, while others are a bit wider at 1 5/8 inches.

How are laundry tubs measured?

If you have a front-loading washer, you may need to measure the diameter as well, which is the length from one side of the tub to the other side, and then divide the result by 2. D equals depth, or the distance from the bottom of the tub to the top. To use this formula, first make your measurements.

What size sink do I need?

To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.

What size sink goes in a 36 inch cabinet?

The height of the cabinet can be customized, but 36 inches is average. A typical 33-by-22-inch sink will fill a 36-inch base cabinet. If you’re replacing a sink, make sure it fits the existing cutout.

How wide is a utility sink?

These sinks typically start at 10 inches and go up to as much as 25 inches deep versus a bathroom sink of six to eight inches deep. They come in a square or rectangular in shape, putting every inch of the basin to work. However, not all utility sinks are made alike.

Does laundry sink add value?

While it’s true that remodeling an existing laundry room won’t really do much for your home’s financial value, if you do not have a first-floor laundry room today, you may be disappointing potential buyers and detracting from your home’s value.

How many receptacles are required in a laundry room?

A laundry room needs at least one 20-amp circuit for receptacles serving laundry equipment; this circuit can supply a clothes washer or a gas dryer.

Which is the most appropriate unit to measure the capacity of a sink?

Liters and milliliters are used when measuring capacity in metric units.

What do you mean by sink capacity?

Definition: The capacity of the environment to absorb the unwanted by-products of production and consumption; exhaust gases from combustion or chemical processing, water used to clean products or people, discarded packaging and goods no longer wanted.

How many liters of water does a kitchen sink can hold?

7) The volume of a kitchen sink is most likely 20 liters or 20 milliliters?

How do you rough in plumbing?

1. Step 1)Mark Key Locations. Determine where all the toilets will be and mark its center on the wall and measure out 13 1/2 inches from that point. …
2. Step 2) Cut the Drain Hole. …
3. Step 3) Drain Pipe Installation. …
4. Step 4) Supply Line Installation.

How much does it cost to install a sink in a laundry room?

Install a laundry sink: national average cost The national average materials cost to install a laundry sink is $369.94 per sink, with a range between $231.82 to $508.07. The total price for labor and materials per sink is $713.08, coming in between $543.11 to $883.05.

How can I hide my utility sink?

1. Step 1: Assemble the Front & Side(s) …
2. Step 2: Fill in the Screw Holes with Wood Filler. …
3. Step 3: Sand Your Piece. …
4. Step 4: Clean Your Piece. …
5. Step 5: Prime & Paint. …
6. Step 6: Buy or Make A Door & Drawer Front. …
7. Step 7: Adhere Your Door and Drawer Front to the Face of Your Faux Vanity.

What should I look for in a laundry faucet?

If you do decide to use a kitchen faucet in the laundry sink, make sure to choose a utility sink that can accommodate a side spray since plastic and metal materials are difficult to cut by hand for a new opening. Or you can select a deck mounted kitchen faucet that has a pull-out or pull-down spray head.

What size is a laundry tub?

They are typically 45L, or 70L for a large one. This is because laundry tubs are more multifunctional.

What is an undermount sink?

What is an Undermount Sink? An undermount sink, as the name suggests, is a sink that is mounted underneath a countertop in a kitchen or other room. Drop-in sinks are mounted to the top of the counter top.

Why is my laundry faucet leaking?

Laundry faucets like this are easy and cheap to fix. If it’s dripping from the spout, you need a new faucet washer. And if water is leaking around the handle, the rubber O-ring around the valve stem is bad. … After you’ve removed the valve stems, take them to the hardware store.

How do you drill a hole in a plastic sink?

Use a carbide-tipped bit in a drill for this task. Drill from the underside up through the top. The speed range can vary depending upon what type of composite sink you have. Plastic composites need the bit to run at a slower speed so the acrylic plastic does not melt during drilling.