While you can mix different brands in the same zone, don’t mix the type of head because they have different flow rates. Rotor heads, spray heads, matched precipitation etc all throw water at a different rate.

Can you mix sprinkler head to existing zone?

You can’t just add one sprinkler head to that area. It’s not enough. A sprinkler puts out less water per sq ft at the outside of the ark than it does near the head. You need 4 sprinkler heads to provide even watering over that whole area.

Can you mix rotary and spray sprinklers?

Never Mix. One thing you want to remember is that you don’t want to mix these all on the same irrigation zone. … They have very mixed precipitation rates and there would be very uneven watering. Now you know the difference between a spray, a rotor, a rotary nozzle, and why you don’t ever want to mix them all together.

Are Rainbird and orbit sprinkler heads interchangeable?

Orbit makes both kinds and they’re universal, so they’ll match whichever brand of sprinkler head you have.

Can you connect multiple sprinklers?

For example, you generally have a flow rate of 10 gpm from a ¾-inch spigot where you connect your hose. With your 10 gpm flow rate at your spigot, you could run two sprinklers at 5 gpm each. The best set-up is to run two hoses from the spigot–each to one sprinkler.

How many sprinkler heads can you have on one line?

At different pressures, the sprinkler head and nozzle will consume different amounts of water. For example, at 35 pounds per square inch (PSI) the 5000 Series Rotor using the 3.0 nozzle will use 3.11 gallons per minute (GPM). If your home’s water capacity was 10 GPM, you could place 3 heads per zone.

Can you mix drip and sprinkler on same zone?

In this situation, where you have sprinkler heads and drip irrigation, the two are not compatible to run on the same zone. Drip irrigation emits water slowly (think a dripping faucet), which will require a longer water run time in order for plants to get enough water.

Which is better hunter or Rainbird?

Hunter products are slightly more durable than Rainbird. They can handle a greater PSI which is important when it comes to water pressure, winterization and extreme weather. Sprinkler heads sit in the ground which experience extreme temperatures. … Hunter Controllers are way easier to program than Rainbird.

Are hunter and orbit the same?

These nozzles fit the Hardtop, Softtop, 54116, 54117, 54080, 54081, and professional 5400 series spray head bodies. … These nozzles are made by Hunter Industries for Orbit and are identical to the Hunter nozzles. So if you can’t find the Orbit brand nozzle you want you can use a Hunter nozzle.

Are orbit and Hunter sprinkler heads interchangeable?

Yes, if you know the model of the existing manufacturer’s sprinkler, you can use our Replacement Charts to find the appropriate Hunter pop-up or rotor that will have a similar flow and distance range. Hunter has rotors and sprinklers to fit all applications.

Article first time published on

Are all sprinkler heads the same?

A replacement sprinkler head doesn’t have to be the same brand as the broken head. But it does have to be the same type: pop-up (stationary, rotor- or gear-driven rotor) or impact. And the new head must also match the inches-per-hour (iph) or gallons-per-minute (gpm) delivery rate of the old head.

How far can a sprinkler head spray?

For example, an upright sprinkler in an ordinary hazard environment can be as far as 15 feet from an adjacent head. That same head can be up to half that distance—as far as 7.5 feet—from a wall.

Can I daisy chain sprinklers?

And while my setup doesn’t reach the edges of my yard, I do have the option of installing up to three additional Quick-Snap sprinklers down the road. These can either be daisy-chained together to function as one unit or used independently when needed.

How much water do pop up sprinklers use?

That might not sound like a lot, but your sprinkler system uses about 12 gallons of water per minute, which works out to 2,160 gallons or $13 over three hours.

How many PSI do I need to run my sprinklers?

The optimum operating pressure for most residential sprinkler heads is between 30 and 50 pounds per square inch (PSI). With correct water pressure, each head will perform the way they were designed, and the result will be even spray-patterns and efficient use of water.

How long should I run each sprinkler zone?

Water Thoroughly: Rotor zones should run for about 30-40 minutes per zone and spray zones 10-15 minutes per zone. 2.

How far apart sprinkler heads should be?

Types of Sprinkler Heads Because of the lower PSI the distance of the spray rarely exceeds 15ft. Meaning that spray heads should never be placed further than 15 ft. apart as this would create dry spots (i.e. dead grass) in your lawn. It is always important to install sprinklers with overlap for full coverage.

How long do I run my sprinklers to get 1 inch of water?

To determine how long you need to water to get one inch, place a plastic container in your yard and set a timer. On average, it will take 30 minutes to get a half inch of water. So, 20 minutes, three times per week will give a lawn about an inch of water. This formula works best with healthy, well-cultivated soil.

How do I increase water pressure in my sprinkler system?

Remove a few sprinkler heads from each of the zones in your system and cap the plumbing that led to them. Decreasing the number of sprinkler heads will increase the water pressure in those that remain. Install a boost pump on the main irrigation line.

Is Rainbird a good sprinkler system?

Sure, there are other types of lawn sprinkler systems. But for homeowners who want a sprinkler system that is well-built, reliable and relatively affordable, Rainbird and Hunter sprinkler systems represent the gold standards, the best of the best, the right way to water your lawn.

Why does my Rain Bird Sprinkler not rotate?

The Reason for Not Rotating: The sprinkler will not rotate when there is an issue persisting in the head part. For example, it might have a problem with the water pressure, malfunctioning of the trip point, or the sprinkler head filled with debris. The head of the sprinkler can be removed and needs to clean the debris.

Are Hunter sprinkler heads any good?

The Hunter Pro Spray body is a quality sprinkler body, with a good reinforced wiper seal, and a retraction spring. … I don’t recommend pop-up heights under 3″ for any sprinklers as they do not lift the nozzle high enough to clear most grass, even when closely mowed.

What is the most efficient sprinkler head?

The MP Rotator is the most efficient sprinkler nozzle available on the market today. This high efficiency rotating nozzle has been defined as a water-saving device, perfect for retrofitting older systems and great for new installations. The MP Rotator was designed with efficiency and sustainability in mind.

What is the difference between red and blue Hunter nozzles?

The red nozzles have both higher and lower flow rates than what’s offered in the blue nozzles, but they deliver water very efficiently. The blue nozzles were developed as a result of our customers telling us that they didn’t like the “look” of the spray pattern on the red nozzles.

Can you cap a sprinkler head?

To cap a sprinkler head, you’ll have to remove the existing sprinkler cap and replace it with a flat cap that will prevent water from flowing into that head. You can also completely remove the sprinkler head and cap it with a PVC pipe cap.

How deep should sprinkler heads be buried?

In most locations, 8 to 12 inches of depth will work out for the best. This measurement would be from the top of the buried pipe up to the surface. That means you will need to dig your trench a bit deeper than normal to accommodate the pipes.

How high should a sprinkler head be?

The correct height for a sprinkler head is to have the top of sprinkler head just above the soil surface. No more than a quarter of an inch above the ground level. This lowers the tripping hazard, and a lawn mower can go past it without causing any damage.

What is the minimum distance between a sprinkler head and any obstruction?

In a nutshell, NFPA 25: Standard for the Inspection, Testing, and Maintenance of Water-Based Fire Protection Systems says that objects that can block a sprinkler’s spray must be at least 18 inches away from the deflector.

What is a shrub sprinkler head?

Shrub-style sprinkler bodies are mounted above ground level on a vertical pipe. This allows the sprinkler to be elevated above the level of the plants, where it can spray water over them. Shrub type sprinklers are most often used in areas with tall, dense shrubs.

How do you string sprinklers together?

Connect one side of the spike to the garden hose and run the other side to another hose going to another sprinkler. The spikes come with caps on one end. When connecting spikes together you’ll remove the cap but keep one on at the end of the run.

What is an impact sprinkler head?

An impact sprinkler (sometimes called an impulse sprinkler) is a type of irrigation sprinkler in which the sprinkler head, driven in a circular motion by the force of the outgoing water, pivots on a bearing on top of its threaded attachment nut.