FM200 is a non-flammable gas used for fire suppression. It doesn’t damage electronic products, used correctly it’s safe for people to breathe in and can be used in an enclosed space, making it ideal for data centres.

Is FM-200 banned?

There are no overall or outright bans onFM-200 (HFC227ea) anywhere. However, there are a few notable exceptions where certain countries have created barriers limiting the ability to sell FM-200 (HFC227ea) fire protection systems.

What does FM-200 stand for?

FM-200® (Heptafluoropropane) is a compound of carbon, fluorine and hydrogen (CF3CHFCF3). HFC-227ea is a fast acting clean agent fire suppression gas with a wide range of benefits and applications.

Is FM-200 a halon?

While the FM-200™ does not contain Halon gas, it still uses Hydrofluorocarbons (HFC) to suppress fires, which is not as eco-friendly as other clean agents.

What is FM-200 fire fighting system?

FM200 is a colourless gas which is liquified under pressure for storage. Like Halon 1301 it has a low toxicity level and is superpressurised with Nitrogen to 24.8bar (360psi). It rapidly extinguishes most commonly found fires through a combination of chemical and physical mechanisms. Zero ozone depleting potential.

What gas is used in FM-200?

Some of the most common gases used in fire suppression systems are: Carbon dioxide (CO2) Clean agents, including HFC-227ea (FM200) and FK-5-1-12 (Novec 1230)

Where is FM-200 used?

FM200 fire suppression systems are commonly used in: DATA Centres. Comms Rooms. Telecommunication facilities.

What is the difference between FM-200 and Novec 1230?

Environmental Impact According to the National Fire Protection Association, Novec™ 1230 has a GWP of 1 while FM-200™ has a GWP of 3350. This means Novec™ 1230 is the more environmentally-friendly choice.

Is FM-200 a halocarbon?

1,1,1,2,3,3,3-Heptafluoropropane, also called heptafluoropropane, HFC-227ea (ISO name), HFC-227 or FM200, as well as apaflurane (INN), is a colourless, odourless gaseous halocarbon commonly used as a gaseous fire suppression agent.

What is the difference between FM-200 and CO2?

An FM 200 system is an environmentally friendly, odorless, and clean fire suppression system. Not to be confused with a CO2 System, FM 200 fire suppression systems are electrically non conductive and safe for humans. … Stored as a liquefied compressed gas, FM 200 is an odorless and colorless agent.

Article first time published on

What is NN100?

The NN100 system is a UL listed IG-100 nitrogen gas suppression system. The NN100 system employs no carbon dioxide and no halocarbon. Therefore the NN100 system does not produce toxic gas even in contact with heat or flame.

What is abort switch?

The Abort Switch is used to momentarily interrupt the release circuit signal when the control unit is in the alarm condition. As long as the abort pushbutton is held in, the fire suppression system will not release.

What is Novec gas?

3M™ Novec™ 1230 Fire Protection Fluid is a clean agent fire extinguishant which was developed as a halon replacement and hydrofluorocarbon (HFC) alternative. It belongs to a family of chemicals called halocarbons, a group which includes HFCs and fluoroketones.

Who makes FM-200?

FM-200® clean agent fire suppression systems & service. DuPont™ FM-200® (also known as HFC-227ea) is a Clean Agent Fire Suppressant and is probably the most popular of the Clean Agent family meeting the NFPA Standard 2001 Clean Agent Fire Extinguishing Systems. FM-200® is rated for use on Class A, B, and C type fires.

Does FM-200 expire?

The atmospheric lifetime of FM-200 has been determined to be 36.5 years. The EPA does not consider FM-200 to be a long-lived substance when discharged, and as such, has placed no restrictions on its use.

Is FM-200 ozone depleting?

It is estimated that FM200® has achieved approximately 80% of the worldwide market for the replacement of halon in fire fighting systems15. It was developed as a non ozone depleting replacement for halon 1301. FM200® easily protects most hazards that were traditionally protected by halon 1301.

What is the difference between novec and FM-200?

The two systems differ when it comes to impact on the environment. Both agents cause no ozone depletion. FM200 has a global warming potential of 3500 while Novec 1230 has a global warming potential of 1, making Novec more environmentally friendly.

How much FM-200 do I need?

The FM 200 supplier’s authorized agent normally recommends 7% as the design concentration, based on their experience with the type of fire anticipated in the areas protected. Increase of the agent concentration from 7% to 7.44% has the repercussion on the cost of the agent.

Which gas put out fire?

Carbon dioxide is a non-flammable gas that extinguishes fire by displacing oxygen or taking away the oxygen element of the fire triangle.

Which gas is used for fire control?

Carbon dioxide is primarily suitable for fighting fire classes B and C. Due to its physical properties, carbon dioxide is the only extinguishing gas that is also used in fire extinguishers and fire extinguishing devices.

What is the atmospheric lifetime of FM-200?

While FM-200 has zero ozone depletion potential it has a short atmospheric lifetime of 33 years giving it a Global Warming Potential. FM-200 systems are designed to extinguish fires and most fires are extinguished within 60 seconds.

What is fe227?

FE-227 is an effective fire extinguishing agent that can be used on many types of fires. It is effective for many surface fires, such as flammable liquids, and most solid combustible materials.On a weight-of-agent basis, FE-227 is a very effective gaseous extinguishing agent.

How many groups of halocarbons are there?

halocarbon, any chemical compound of the element carbon and one or more of the halogens (bromine, chlorine, fluorine, iodine); two important subclasses of halocarbons are the chlorocarbons, containing only carbon and chlorine, and the fluorocarbons, containing only carbon and fluorine.

What does novec stand for?

NOVEC stands for Nederlandse Opstelpunten voor Ethercommunicatie and is the largest operator of antenna towers for radio-communication in the Netherlands.

Is FM 200 an inert gas?

The three most common clean agents on the market today are Inert gas (Inergen, Nitrogen, Argonite),3M™ Novec™ 1230 Fire Protection Fluid, and FM-200, which has been a mainstay of fire suppression systems for more than 20 years.

What is the best fire suppression system?

• Offices or other places where people may be present during a fire. …
• Places where entry and exit areas could be blocked—since FM-200 is a gaseous agent, it is able to respond quickly to fires.

What is FM fire extinguisher?

FM200 is a colourless gas which is liquified under pressure for storage. Like Halon 1301 it has a low toxicity level and is superpressurised with Nitrogen to 24.8bar (360psi). It rapidly extinguishes most commonly found fires through a combination of chemical and physical mechanisms.

What is foam system?

Foam systems are primarily water systems with either air or nitrogen injected into the system. Mechanical equipment includes compressors, drillstring floats, a rotating control device, a separator, and a flare. The gas source (compressor, etc) is a major cost in this group.

What are the 4 types of fire extinguishers?

• Class A extinguishers will put out fires in ordinary combustibles such as wood and paper.
• Class B extinguishers are for use on flammable liquids like grease, gasoline and oil.