Both Manitowoc and Hoshizaki manufacture top-quality ice machine products. In fact, they are the two most widely used commercial ice machines worldwide.

Where is Hoshizaki?

Hoshizaki Electric Company, now the Hoshizaki Corporation, was established in February, 1947 in Nagoya, Japan by Mr. Shigetoshi Sakamoto. One of the first electrical products sold by Hoshizaki Electric was vehicle horns.

How does a Hoshizaki ice machine work?

The freeze cycle on Hoshizaki KM ice machines is controlled by water level. As the ice is being formed on the evaporator the level of water in the reservoir drops. Once it has dropped low enough to open the float switch the freeze cycle is terminated and the pump out or harvest cycle begins.

Does Hoshizaki make clear ice?

Ice Cube Sizes & Shapes Hoshizaki ice machines produce exceptionally hard, crystal clear ice cubes.

What does HPCO active mean on a Manitowoc ice machine?

HPCO is a high pressure cutout control. Why does it happen? Well, could be a number of reasons. If you provide your model number, we might be able to be more specific, but generally there’s an overheating issue. The compressor is likely overheating and therefore over pressure (thus the pressure cutout control)

Is Hoshizaki Made in USA?

Having Hoshizaki products certified as “Georgia Made” assures quality and pride throughout Georgia and around the world. … With corporate headquarters in Peachtree City, Georgia, and a second manufacturing facility in Griffin, Georgia, Hoshizaki operates some of the most automated production facilities in the industry.

How old is my Manitowoc ice machine?

You can find the date listed above the serial number listed as “MFG DT”. A Manitowoc serial number’s nomenclature is easy to decipher. The four-digit code is listed as year followed by the month of production. For example, in the example above the label reads MFG DT 1809, the machine was manufactured in September 2018.

Which portable ice makers are made in the USA?

The major American brands of Commercial Ice Makers that IceMachinesPlus.com carries are Follett, Ice-O-Matic, Hoshizaki, and Manitowoc. Some of these US Ice Maker companies produce an Undercounter Ice Maker and an Ice Maker with a Water Dispenser feature.

Why does my Hoshizaki Ice Maker beep?

Why is My Hoshizaki Ice Machine Beeping Twice? A Hoshizaki 2 beep alarm happens when your ice machine encounters two extended harvest cycles in a row. During a Hoshizaki ice maker’s harvest cycle, the machine’s control board will start a 20-minute timer.

What is a half dice ice cube?

Half dice ice is one of our most popular ice shapes. This unique, thin shaped cube is perfect for bars looking for maximum cooling and capacity. At 96 cubes per pound of ice, half dice fills glasses leaving very little space in between cubes, making drinks look fuller and limiting overpours.

Article first time published on

What is a top hat ice cube?

Top hat-style cubes provide a hard individual gourmet ice. They are perfect for offices, residential, rooms or suites, outdoor kitchens, and healthcare. In the flake category, we offer the traditional fine-flaked ice and cubelets, a larger chewable ice.

How do I turn on hoshizaki?

1. To turn the Hoshizaki ice machine on, either plug the unit back into the outlet or turn the breaker back on. …
2. Open the ice machine as described above.
3. Flip switch to the “ICE” position. …
4. Once the machine is on, replace the front panel as explained above.

What is the purpose of a photo electric eye on an ice machine?

Electronic water level control prevents problems associated with water pressure fluctuations. Continuous length evaporator refrigerant tubing eliminates potential refrigerant leaks. Photoelectric eye bin control allows maximum storage in bin. Continuous ice making, no hot gas cycle, no water dump.

How much water does a Hoshizaki ice machine use?

Commercial ice machines generally require 5 gallons a minute. You may need a plumber to optimize your water line for installation.

What is a HPCO switch?

The High Pressure Cutout Control (HPCO) disconnects main line voltage (L1) to the ice machine control board when subjected to excessive high side pressure. The switch is normally closed and opens on an increase in pressure.

How do you reset the Manitowoc ice machine?

1. Press the OFF button for 3 seconds.
2. Wait for ice to melt off the evaporator.
3. Disconnect power to the machine and wait about 10 seconds.
4. Plug the machine back in and press the ON button. A blue light should appear, indicating that the unit has been reset.

How long do Manitowoc ice machines last?

The make and model of the machine plays a major role in longevity. Easy Ice carries a full lineup of commercial ice makers from top-quality ice machine manufacturers like Hoshizaki and Manitowoc. We’ve seen Hoshizaki and Manitowoc models last more than 15 years – provided they receive routine maintenance and cleaning.

What does Mfg DT stand for?

To find the date the unit was manufactured, look on the data plate for a box that contains MF DT or MFG DT (manufactured date) followed by four numbers.

How old is my Hoshizaki Ice Maker?

The first letter of a Hoshizaki serial number denotes the year your Hoshizaki ice maker was produced. Each letter denotes the last number of the year. For instance, “C” corresponds to “3”, so the year in the example above would mean the ice machine was manufactured in 2013.

How do you reset a Hoshizaki Ice Maker?

The reset button on a Hoshizaki ice maker typically is located on the ice maker’s control board next to a yellow and orange light. With the power on, press the button while the board is beeping. The machine should begin the startup process.

What does 3 beeps mean on a ice machine?

The 3-beep error is the result of two consecutive long freeze cycles. The length of the maximum freeze cycle is determined by the position of DIP switches 9 & 10. … This is when the safety alarm engages and locks the machine out on a manual reset, 3-beep audible alarm.

What does 5 beeps mean on a Hoshizaki ice machine?

5 Beeps = Open K4 connection: This alarm is the opposite of the four-beep alarm; it identifies an open circuit in the mechanical bin control circuit. 6 Beeps = Low Voltage: This code is one of two automatic reset errors provided by the board. It signals a low voltage situation.

What do I look for if my unit is beeping 4 times every 3 seconds?

When the machine beeps once every 3 seconds it indicates the HIGH TEMPERATURE SAFETY switch has been triggered. The HIGH TEMPERATURE SAFETY is activated, when the thermistor which is mounted on the suction line reaches a temperature of 127° F.

Do countertop ice makers use a lot of electricity?

Ice makers: Ice maker energy use is around 350 kilowatt hours (kWh) in a month—at a typical rate of $0.06 per kWh, that would cost around $21 a month.

Why is pellet ice so good?

Nugget ice (also known as “Pellet”, “Chewy”, “Sonic”, “The Good” ice) is a cult classic for the following reasons: It is the most satisfying ice to chew on. It is light and airy. It doesn’t melt as quickly as crushed ice.

What is Sonic ice called?

Sonic ice comes in many names such as cubelet ice, pellet ice, nugget ice, or even Chick-fil-A ice. The “Sonic” in the name refers to the popular drive-up food chain whose signature slushes have become a fan favorite. Nugget-style ice is the go-to choice for these drinks, hence the name.

What makes a hoshizaki go into harvest?

When the freeze cycle has reached the maximum freeze time and the float switch has not opened to terminate the freeze cycle the control board will automatically initiate a harvest cycle. After completion of harvest the unit will continue into the next freeze cycle.

How long is a hoshizaki freeze cycle?

The freeze cycle will generally last from 25-45 minutes with the average being around 35 minutes. This depends on model and ambient and water conditions. Termination of the freeze cycle is controlled by the float switch, which monitors water level.

How do you clean a float switch?

If the float, housing, and shaft are scaled up you can clean them by soaking them in ice machine cleaner. Either turn the float upside down, plug the stand pipe holes and pour in the cleaner or fill a container and stand the float switch in it for a while.

What size is nugget ice?

Nugget ice maker models produce nugget ice in sizes ranging from 3/8” to ½” in width and length. Whether you’re looking for a nugget ice machine and bin or a nugget ice dispenser for self-serve stations, we have all kinds of options. We offer nugget ice maker models that produce up to 800 lbs of ice a day!

What is full dice?

Full-dice ice may also be simply called “dice ice.” They are very similar to the half-dice cubes. They are hard, clear ice cubes with a rhomboid shape, but they measure 7/8” x 7/8” x 7/8”. Full-dice cubes provide maximum cooling with a nearly 100% ice to water ratio. They are most commonly used in restaurants and bars.