Once installed, HardieFlex sheets are resistant to damage caused by moisture, so there is usually no need to replace your wall or ceiling if some moisture gets in.

Can I use Hardiflex outdoors?

HardieFlex® Senepa is used as backing for roof gutters and to enhance roof designs. HardieFlex® Eaves are used with an extension of the roof over the side of the house. HardiePlank® Siding adds protection and design value to a home. It can be used both externally and internally as design accent to a home.

What is Hardiflex wood?

HardieFlex® Eaves comes in plain or with built-in ventilation which lessens on-site punching & manual cutting. It is fire-resistant and deemed to be non-combustible. At the same time, it is resistant to damage caused by moisture, termites and rotting.

Can Hardiflex be painted?

The most economical type of paint recommended for HardieFlex fiber cement boards are water-based (latex) paints. Acrylic, vinyl, and PVA are all water-based paints as well. … Oil-based (alkyds or enamel) paints can also be used on HardieFlex fiber cement boards, although they would cost more than water-based.

Do termites eat HardiFlex?

Hardiflex Building Board Information. HardiFlex building boards are as durable as they are adaptable – they will not burn, are resistant to permanent water and termite damage and when installed as directed, are resistant to rot and warping.

Are cement boards waterproof?

Although cement boards are not waterproof, they are water resistant. Consequently, whilst they do not entirely prevent the passage of water, they may be considered for wet environments. Cement boards are heavy sheets and may require two people to install.

Is HardiFlex fire resistance?

Each Hardieflex®board is durable3 enough to withstand varying weather conditions giving you peace of mind all year-round. Fire isn’t the only thing it performs well against; it is also resistant moisture damageand even resistant to damage from termites.

Is HardiFlex good for fascia board?

HardieFlex® Senepa 9.0mm is a versatile fascia board suitable for all types of houses. It can be used to highlight intricate roof designs and it operates as backing for gutter systems to prevent water and vermin from entering the structure through the eaves line. It is fire-resistant and deemed to be non-combustible.

Is HardiFlex a cement board?

HardieFlex® Fiber Cement Board 4.5mm is the best ceiling solution for internal residential applications greater than 6sqm, and as a standard solution for internal walls exposed to low traffic. It is fire-resistant and deemed to be non-combustible.

Is HardiFlex a brand?

FIBER CEMENT BOARD / FICEM BOARD (Brands: Hardieflex/Hardiflex, Gardnerboardm, and Flexboard)

Article first time published on

What is HardiFlex sheeting?

A smooth, flat sheet that is produced in a range of widths James Hardie Fibre Cement Cladding is specifically designed for use as external wall cladding, eaves or soffit lining in residential and medium density homes. It is site-painted to create a flat panel look.

Is FC sheet waterproof?

Fibre cement cladding is a popular choice for builders because it is simple to install and brings with it a host of benefits. It is weather-proof and resistant to water. This means you don’t have to contend with rot or warp as a result of weathering or water damage.

What is Hardiflex for ceiling?

HardieFlex® Ceilings are flexible and may be used in curved seamless and panelized or tiled designs. It can also be used for wet area applications (such as areas of bathroom, kitchen, laundry area).

Is marine plywood good for ceiling?

While mainly used for building fishing boats or bancas, marine plywood is also standard material for building houses and making furniture. It is ideal for wall and ceiling panels, and as base for asphalt shingle roofing and wooden flooring. … Marine plywood is thicker, harder and sturdier than ordinary plywood.

What do termites hate?

Termites hate sunlight. In fact, they can actually die if they are exposed to too much sunlight and heat. If you have a piece of furniture you suspect to be infested with termites, you can drag it out into the yard to bake in the Arizona sun for a bit.

What wood is naturally termite resistant?

The wood that is most resistant to termites, naturally, is teak wood, followed by redwood. Both teak and redwood are hardwood species, but that doesn’t mean all hardwood species are resistant to termites.

What attracts termites to a house?

In addition to wood inside the home, termites are drawn inside by moisture, wood in contact with house foundations, and cracks in building exteriors. Different combinations of these factors attract different species. Additionally, geographic location plays a role in how likely homeowners are to deal with infestations.

Does Hardie board need waterproofing?

Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.

How hot does Hardie get?

TaoFibre® ceramic fiber millboard maintains its strength and thermal stability throughout a wide temperature range up to 2300 ºF.”

Is Hardie board fire proof?

Yes, HardieBacker® 1/4″ Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace. This does not mean that clearances to combustible building materials can be reduced by using HardieBacker 1/4″.

What cement board is waterproof?

HardieBacker® Cement Board with HydroDefense™ Technology is a long-lasting, waterproof solution for walls, floors, and countertops.

Can cement board be used outdoors?

Made with Portland cement, aggregate and fiberglass mesh, it works well with exterior applications. Lightweight and easy to install, our patented EdgeTech® Technology allows a closer nail or screw application.

Is cement board good for exterior?

It can be used on the exterior of buildings as a base for exterior plaster (stucco) systems and sometimes as the finish system itself. Cement board adds impact resistance and strength to the wall surface as compared to water resistant gypsum boards.

What is the size of HardiFlex Philippines?

ITEM NO.DESCRIPTIONSIZE / DIMENSION1HARDFLEX4ft x 8ft, 3.5mm thikness2HARDFLEX4ft x 8ft, 4.5mm thickness3HARDFLEX4ft x 8ft, 6mm thickness4HARDFLEX4ft x 8ft, 9mm thickness

What is the component of HardiFlex?

HardieFlex Sheets are a cellulose fibre reinforced cement building product. The basic composition is Portland cement, ground sand, cellulose fibre and water.

What is the size of HardiFlex?

Sheet ThicknessDimension (Length x width)4.5mm9.0mm2440mm x 1220mm (8ft x 4ft)3660mm x 1220mm *

What is Hardie Senepa?

HardieFlex® Senepa is a versatile fascia board suitable for all types of houses. HardieFlex® Senepa can be used to highlight intricate roof designs and it operates as a backing to gutter systems to prevent water and vermin from entering the structure through the eaves line.

How thick should fascia board be?

Replacement fascias do vary in thickness by manufacturer, but the rule of thumb is that to qualify structurally as a replacement board they should be somewhere between 16mm and 25mm thick – our most common range is the 18mm Replacement Fascia.

What is fascia cover?

Fascia covers, also called fascia trim, protect the vertically-oriented edge of a roof. … When used to cover a building’s fascia board, they are installed along the perimeter of the roof to guard the underlying boards and rafters from weather damage and animals and insects.

What is fiber cement board used for?

Fiber cement siding is a durable and low-maintenance material that is commonly used to cover the exterior of houses and, in some cases, commercial buildings. It’s manufactured with cellulose fibers, along with cement and sand, making it long-lasting and durable.

What board is used for eaves?

A smooth, flat, square edged sheet that is produced in the most common widths for eaves overhangs. For eaves or soffits wider than 750mm, Hardie™ Flex cladding can be used. Sheets can be painted on site to create a flat panel look.