R4 tires, also known as industrial tires, are wide and durable tires designed primarily for use on hard surfaces like pavement and gravel. In terms of tread depth and lug spacing, they fall in between R1 and R3 tires.

What is an R4 tread pattern?

R4 Tires. R4 tires are most commonly used in roadwork or hard ground applications. They have a tread depth that’s about halfway between the depth on R1 and R3 tires.

What is the most aggressive tractor tire?

R-1 Tires. R-1 tires, or ag tires, feature the most aggressive tread patterns of the three types of compact tractor tires and are best-suited to work in soft soils and loose dirt.

What is the difference between R1 and R2 tractor tires?

R1W is a wet traction tread for wet, sticky soil conditions. … R2 is a tread type used typically with cane and rice or other crops grown in wet muck or flooded fields. Tread depth of R2 tires is approximately twice as deep as R1 tires. R2 tires also have the widest spacing between lugs to allow mud to shed easier.

What do tractor tire numbers mean?

The three-number lawn tractor tires numbering system works a bit differently. … The first number before the “x” indicates the tire’s diameter when inflated and not under load. The middle number between the “x” and the “-,” indicates the tire’s width. The final number indicates the width of the rim.

What is the minimum tread depth for semi tires?

Tread depth. Not only do tires with deeper tread last longer, they’re also more resistant to punctures. The U.S. Department of Transportation requires that semi trailer tires have a tread depth of at least 2/32”. However, most people who have industry experience will say that exceeding that minimum is advised.

Are R4 tires any good?

An R4 tire is best in industrial or highway department work applications. These tires offer excellent traction on harder surfaces such as construction lots and are less aggressive on turf than an R1 tire. … An R4 tread depth is about 70 percent as deep as an R1 tire.

What are ag tires?

Ag tires are primarily used for agricultural use where the equipment will be used for navigating across and through the uneven and rough terrain of farms, fields, etc. They have a very aggressive tread that sheds snow and mud superbly. Most common are R-1 and for those in wet mucky conditions, R-1W.

What are ag tires good for?

Ag: The most aggressive tire of the three, the ag tire was built for soft fields and loose dirt. Their narrow design increases traction and their large tread digs into soft surface giving you maximum traction. These tires are recommended for snow work, muddy work, bush hogging and general farm use.

What does r1w mean?

The language itself, R-1 and R-1W, is a tire industry standard defining the minimum designed tread depth of an agricultural traction tire. The Tire and Rim Association defines the minimum bar height based on the tire width and the aspect ratio (height of the sidewall).

Article first time published on

What does F2 mean on tractor tires?

F2. This is a free-rolling, three-rib steer tire used in general dryland farming. It typically complements a rear R1 tire. F2M. This is a free-rolling, four-rib steer tire used in general dryland farming.

What tractor tires are best for snow?

Farm Tractor Snow Plow Tires Many manufacturers make traction tires for snow and ice including BKT, Nokian and Michelin. These tires features extra traction tread patterns that are designed to provide optimal traction on snow and ice. One of the best tires to use on tractors used for snow plowing is the Nokian TRI2.

What's better 2 ply or 4 ply tires?

A 4 Ply tire is more resistant to punctures, can take more load, and take tire repair better than a 2 ply. A 2 ply tire is usually less expensive than a 4 ply, can’t take as much load as a higher ply tire and tends to flex more when hot.

How do you read tractor tires?

Locate your tire size on the sidewall of the tire. The first number represents the overall WIDTH when mounted and inflated to the proper air pressure but it is measured in millimeters. Divide this number by 25.4 to convert to inches. This will become the second number for a traditional tractor tire size.

What does R mean on a tractor tire?

– The letter R indicates radial construction. Read more about Radial Traction Solutions and see a Traction Comparison Chart. -15 indicates the rim diameter and means this tire would fit a rim with a 15 inch diameter.

What is better R1 or R4 tractor tires?

As was mentioned, the R1 will have better traction than an R4 in mud. The R1 is better for loader work in the fields and woods. Positives for the R4; Standard on most compact tractors- it’s a landscaping/ construction tire that’s generally more rugged and lasts longer in rough conditions.

How long do tractor tires last?

Rubber is perishable and can degrade, so you should consider replacing tyres that are over five years old, even if they have tread remaining.

Why do truck drivers hit their tires with a hammer?

” Truck drivers use the wood devices to check air pressure in their tires. A tire thumper looks something like a sawed-off baseball bat. … If a tire is fully pressurized, the thumper makes a satisfying “thump” as it hits the rubber. If the tire is low on air, it makes a different sound.

How many psi should a semi tire have?

SET STEER TIRE PRESSURE at 110 psi on a 12,000-pound front axle. SET DRIVE AND TRAILER TIRE PRESSURE within a broader allowable range. The legal load rating is only 75 psi for those tires. Most truckers settle between 85 psi and 105 psi, with 95 psi being the most common.

Is it legal to patch a steer tire on a semi?

Perfectly legal The only federal regulation regarding the use of retreads on steer axles of commercial vehicles is found in Federal Motor Carrier Safety Regulation (FMSCR) Part 393.75 (d), which states: “No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.”

What are the different types of tractor tires?

• Agricultural Tractor Tires (R1)
• Turf Tractor Tires (R3)
• Industrial Tractor Tires (R4)

What does ply mean on tractor tires?

The ply rating on a tire indicates the operating load the tire can carry. Lawn mower tires generally have one of three ply ratings: 2, 4 or 6. The higher the ply number, the higher the load carrying capacities. The lower the ply rating, the softer the ride but will be more prone to a puncture.

What is the difference between an industrial and agricultural tractor?

Industrial tractors is a term generally used to signify a tractor not built for Agricultural use. … Most of the major manufactures sell a range of tractors that have different specifications from the main Agricultural range. They are often more basic designs, fitted with a general purpose type tyre for road and yard use.

Which tractor TYRE is best?

1. Apollo Tyres. Apollo Tyres Ltd is the 7th largest tyre manufacturer in the world. …
2. CEAT Tyres. …
3. BKT Tyres. …
4. Good Year Tyres & Rubber Company. …
5. MRF Tyres. …
6. JK Tyres.

Who makes Titan tractor tires?

IndustryTiresFounded1993FounderMaurice M. Taylor Jr.HeadquartersQuincy, Illinois , United States

How wide is a 480 tractor tire?

Tire size conversion chartInch sizeMetric conversion (mm)31.580035.4900Formula for metric to English conversion: divide the metric number (in mm) by 25.4 to get inchesExample: 480-mm section width / 25.4 = 18.89-in. section width tire

How much does a tractor tire cost?

How much do tractor tires cost? A radial design tractor tire from Titan Tire Corporation has an average retail price of US$1,600 to US$2,900. Some new tires might come cheaper at US$400, but still, it costs a fortune for many. Buying used tractor tires will save you from breaking your bank.

How wide is a John Deere Model A?

John Deere Model ALength124 inches (310 cm)Width83 inches (210 cm)Height60 inches (150 cm)Weight3,783 pounds (1,716 kg)

Why are tractor tires ribbed?

Rib Options for Front Tractor Tires The tall single rib develops excellent force when steering and there are no grooves to fill up with mud. … The taller center rib develops the force when steering in loose soil and the outside ribs help carry the load when operating on paved surfaces.

What does R1 mean on tractor tires?

R1: Agricultural Tire R1 tires, also known as agricultural or ag tires, are the standard workaholic tires used for farm tractors. Their treads feature large, widely-spaced lugs designed to generate maximum traction over challenging terrain (including mud and snow) without slipping or clogged.

What is the difference between load index and load range?

Load index is a more precise method of measurement than load range which focuses mostly on construction. The load index number indicates a tire’s carrying capacity when inflated to maximum load sustaining pressure.