HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

What is LATICRETE HYDRO BAN used for?

HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates. Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

What is the difference between HYDRO BAN and hydro barrier?

The key difference is Hydro Barrier requires fabric to be used in all the corners and seams while Hydro Ban does not. … There is also a color difference – Hydro Ban is sage color and will dry to an olive green color while Hydro Barrier is a light blue and will dry to a dark blue color.

How long does HYDRO BAN last?

HYDRO BAN bonds directly to a wide variety of substrates. Factory sealed containers of this product are guaranteed to be of first quality for two (2) years if stored at temperatures >32°F (0°C) and <110°F (43°C).

Is laticrete waterproof?

LATICRETE® tile waterproofing membrane products provide protection for floors and walls for applications ranging from occasionally wet, to continuous water submersion as in showers or pools. … Our shower waterproofing membrane has been industry tested to withstand the test of time.

Can I paint over HYDRO BAN?

Yes you can, but if the hydroban is applied roughly the paint will show it.

What color is laticrete Hydro Ban?

HYDRO BAN will change from a sage green color to an olive green color when dry. The second liquid coat can then be applied and must also dry to the touch. A LATICRETE latex-fortified thin-set (e.g. 257 Titanium, 254 Platinum, etc…)

What is waterproof membrane?

A waterproofing membrane is a thin layer of material used to prevent water from contacting another material that it is placed over. Waterproofing membranes may be adhesive or simply laid on top of the material they are supposed to protect.

Can HYDRO BAN be used outside?

LATICRETE Hydro Ban is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. LATICRETE Hydro Ban bonds directly to a wide variety of substrates. Interior and exterior. Swimming pools, fountains and water features.

What is Hydroban made of?

HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates.

Article first time published on

What is anti fracture membrane?

An anti-fracture membrane is a layer of material that expands and contracts so movement in the concrete is not directly transferred to the tile and helps to keep cracks from forming and ruining your work.

What is a shower membrane?

A shower floor membrane, sometimes called a pan liner, catches all moisture that seeps past the floor tile and directs it toward the floor drain. … The shower floor installation portion of the project starts after a local building inspector approves the work, when applicable.

How do you remove liquid waterproofing?

If the waterproof membrane was applied using an adhesive, a blowtorch may be required to melt the adhesive enough for it to be removed. After this is done, a good scraping or blast from a compressor will remove any leftover residue.

How do you use Latapoxy 300?

Pour LATAPOXY 300 Adhesive Part A and Part B into a clean mixing pail and mix thoroughly. Add LATAPOXY 300 Part C Filler Powder and mix to a smooth, trowelable consistency. Mortar is ready for use immediately after mixing.

Is laticrete Permacolor sanded or unsanded?

Laticrete® Permacolor Sanded Grout is a high-performance, fast-setting grout that provides a grout joint that is dense and hard. … While it does contain sand particles, Laticrete Permacolor uses finer grains compared to other sanded grouts while still providing the same grip and durability.

Can you paint over laticrete Hydro barrier?

HYDRO BAN can be applied with a paint brush, paint roller (heavy napped roller) or a 5 mm x 4 mm V-notch trowel. When the first coat has completely dried to the dark olive green colour, apply a second liberal coat^ of HYDRO BAN liquid and allow to cure.

Can you paint over RedGard waterproofing?

You can paint over RedGard, but it will void the warranty that comes with the RedGard product. The warranty is in place to show that the manufacturer is confident that this product is going to remain waterproof for the duration of its time on your wall or floor.

How do you use anti Hydro?

When placing fresh concrete or mortar on existing masonry surfaces, dampen the clean, uncoated surface with clean water. Just prior to placing fresh concrete or mortar, mix by volume; 1 part “ANTI-HYDRO®” with 3 parts water. Add enough portland cement to achieve a thick, creamy mixture, free of lumps. Mix thoroughly.

How do you waterproof a shower niche?

1. To waterproof a tiled niche, apply waterproof backerboard to the inside surfaces of the niche. …
2. Next, apply waterproof membrane, bedding it in unmodified thinset. …
3. With the waterproofing complete, install the tile starting with the bottom of the niche, which should have a slight pitch for drainage.

How long does waterproofing membrane last?

While basic waterproofing membranes should last at least ten years, they can last much longer given the right choice and circumstances. Conversely, poor quality waterproofing will rarely last the distance.

What is green waterproofing?

Green Barrier is a waterproofing membrane used under a surface layer of tile. It is a ready-to-use, liquid-applied, elastomeric waterproofing membrane for use in bath/locker rooms. Green Barrier is ideal for wood and masonry surfaces, such as cement backer board and concrete.

What is tanking membrane made of?

Made from high quality HDPE, they are designed to withstand years of temperature fluctuation and exposure to water without becoming worn or degraded. Tanking membranes are easy to install onto damp walls, creating a small cavity to allow the wall to dry out.

Is anti fracture membrane waterproof?

AFM-WM is a 40 mil peel-and-stick crack isolation sheet waterproofing membrane for use beneath thin-set tile and stone applications. … Once the cohesive bond occurs, AFM-WM turns into a monolithic or single-ply membrane across the entire surface being waterproofed.

Do I need crack isolation membrane?

If you have more than one crack in the floor, in many cases you have nearly covered the entire floor; so why not just install full coverage membrane. … TCNA requires that a crack isolation membrane be installed on above ground concrete floors when an ANSI A118. 4 thin set mortar is used to install large format tile.