Tried the lampe berger and it really does eliminate the stinky smells and leaves the room smelling fresh. It also helps with food smells, potent plastic smells (from new storage shelves), musty air, and even stinky garbage smells. I have used it every day since I got it, in multiple rooms in my house.

Can you use fragrance oil in Lampe Berger?

Blend Your Lamp Oil Using a disposable pipette, add roughly 20 drops of your fragrance oil to your bottle of isopropyl. By doing this, you will get the right proportions of both ingredients. Once you have done this, close the bottle and make sure the cap is on tight.

How long do you let a Lampe Berger burn?

Light the catalytic burner and let the flame burn for about 2 minutes. Blow out the flame and put the open protective top on your fragrance lamp. The average size room only requires about 20 minutes of use.

Does Lampe Berger disinfect air?

Taken from Lampe Berger The lamp purifies the air through eliminating odor-causing molecules and bacteria. Lampe Burger uses a catalytic burner that heats to burn an alcohol-based liquid fuel. The alcohol releases molecules into the air that eliminate odor while diffusing scent at the same time.

Why is Lampe Berger banned California?

Lamps Berger oil cannot be sent to California because of cali law. The lamp itself would not fit in a non toxic category, but the lamp without lampe Berger oil would not be toxic. … You have a clean air act in California, Yes this product is non toxic and safe in every aspect.

How often can I use Lampe Berger?

How long should I burn my lamp? If you haven’t burned a Lampe Berger in your home before or at least in a few days you will need to burn your Lampe Berger 1 hour for every 600sq. ft. of home the first time, and then repeat every day after that for 30 minutes for up to 2000sq ft.

Is a Lampe Berger toxic?

Lampe Berger is an alcohol based fragrance that burns clean and does not emit any harmful toxins or chemicals.

Is Maison Berger the same as Lampe Berger?

The Maison Berger Paris brand designs, produces and sells the perfumes for Lampe Berger. In some shops, you may find Lampe Berger Paris perfumes; they are the same as the Maison Berger Paris lamp refills. What is the point of using a scented reed diffuser?

Can you use other oil Lampe Berger?

Do not use any paraffin based lamp oils, as your house will quickly fill with smoke. Making lampe berger oil. You will need isopropyl alcohol,and a fragrance oil. Use 16 ounces of isopropyl alcohol,add 10 drops of oil to your bottle.

Who invented Lampe Berger?

In 1898, Maurice Berger created and patented the Lampe Berger catalytic burner diffusion system that purifies and fragrances the air.

Article first time published on

Why does my Lampe Berger keep going out?

Provided that is the case, the reason your Lampe Berger burner will not stay lit is probably because the wick has soaked up too much fragrance oil and has become overly saturated. … Your wick needs replacement – You should replace your Lampe Berger Wick / Burner every year or 200 uses, whatever comes first.

Does lamp oil go bad?

According to CFD Publications, lamp oil has “an indefinite shelf life” as long as you store the oil properly. Place the bottle of lamp oil in a dry and slightly warm area, keeping the oil at room temperature when not in use. Avoid placing the oil in colder rooms and do not freeze the lamp oil.

Can you mix Lampe Berger scents?

There are over 40 Lampe Berger fragrances available so you can select just the right scent for your environment. While it’s wonderful to be able to use so many different scents with one lamp, switching fragrances can be tricky. … Neutral can also be blended with any fragrance to make it more subtle.

How do I remove a Lampe Berger wick?

If your wick is clogged, Lampe Berger wick cleaning is easy with Neutral fragrance oil. Simple fill your lamp with only Neutral oil and let it burn with just that until the wick unclogs. It’s good practice to use a little bit of Neutral between fragrances to keep your burner working efficiently.

What is effusion lamp?

Also known as a “perfume lamp”, “effusion lamp,” or “catalytic lamp”, a fragrance lamp is a lamp that disperses scented alcohol using a catalytic combustion wick consisting of a cotton wick threaded through a natural, porous stone.

Is Lampe Berger a diffuser?

One such product, a Lampe Berger, is unique in its features: Unlike diffusers or humidifiers, it operates based on a catalytic burner that combusts liquid fuel that is alcohol-based.

Who invented the Lampe?

Designed in 1898 to purify the air in hospitals, the small catalytic lamp created by pharmacy dispenser Maurice Berger, quickly became very popular with the public.

What scent is bad for dogs?

Many essential oils, such as eucalyptus oil, tea tree oil, cinnamon, citrus, peppermint, pine, wintergreen, and ylang ylang are straight up toxic to pets. These are toxic whether they are applied to the skin, used in diffusers or licked up in the case of a spill.

Can you put alcohol in a Lampe Berger?

Getting Started. Creating your own Lampe Berger oil at home takes only a handful of ingredients – the most important of which will be a bottle of 90 percent isopropyl alcohol, which can be found at most pharmacies. … You’ll need about 16 fluid ounces to refill your lamp once.

How can I make my lamp oil smell better?

Add 15 to 30 drops of your rosemary-scented oil to the unscented lamp oil. The amount of rosemary oil you add should be based on your preference, with more drops offering a stronger aroma.

Why does my Lampe Berger smoke?

Let it burn for 30 seconds or so, blow out the flame, and your Lampe Berger will start emitting a smoke that is the scent of the Lampe Berger fluid. Don’t let the flame burn longer than the suggested time on the bottle and make sure after continued use to refill your container! Enjoy!!

How do I keep my oil lamp from burning?

1. Never burn dry wicks. Always make sure they are completely soaked in lamp oil.
2. If you see any smoke while your wick is lit then you’ve got the flame too high.
3. For optimum burning, the wick should be periodically trimmed to remove the burned edges and carbon deposits. Do this when the lamp is cold.