Unlike the other guys out there, Ramp Armor is more affordably priced and lasts just as long while riding just as good, if not better. Made with high-quality materials and 100% cotton. Ramp Armor surfacing is perfect for your indoor or outdoor projects.

What material is used for skate ramps?

The vast majority of skatepark bowls and ramps are made from concrete, and while this is the ideal material due to its smoothness and durability, it is by no means the only suitable construction material. Other options include wood, composite wood, steel, or fiberglass.

What is Skatelite pro made of?

Skatelite Pro Natural is made from recycled paper in the Midwest of the United States.

What are OC Ramps made of?

About OC Ramps All of their ramps are made from wood—they are stronger and more durable than any other ramps. Top pro skateboarders also prefer wooden ramps as their riding choice! OC Ramps skateboard ramp kits include pre-drilled boards, rust-proof screws and an easy-to-follow instruction booklet.

Is Skatelite waterproof?

Fast and super strong, professional grade Skatelite Pro is the supreme riding surface for outdoor skateparks and backyard ramps. The solid material is weatherproof and withstands the constant punishment inflicted by determined riders.

Can I skate on plywood?

Skate the plywood – you can stick with the 2 layers of plywood and skate that. The untreated plywood is not resistant to sun and rain, so you will need to protect it. Keep in mind plywood hurts more to fall on.

What kind of plywood do you use for a skate ramp?

We recommend using any type of smooth and sanded plywood. Particle board is quite possibly the worst type of wood you could use! A halfpipe outdoors with plywood will need something such as Skatepaint to help protect the wood from rain/snow.

How do you waterproof a skate ramp?

The standard way to waterproof your ramp is to paint it using a paint designed specifically for use on skate ramps. Coating your deck with paint protects it from various weather conditions such as heat, humidity and sunlight, as well as rain.

What is Skatepaint made of?

What is Skatepaint? A polyurethane epoxy component paint designed specifically for wooden skate ramps.

How much do skate ramps cost?

QuantityMaterialPrice64′ x 8′ sheet of 1/4″ massonite$1128 feet long 1.5″ diameter metal pipe$18

Article first time published on

Can you varnish a skate ramp?

Do It the Right Way & Protect Your Ramp with SkateSeal SkateSeal is a premium quality protective coating specifically formulated for timber skate ramps. SkateSeal was developed for skateboarding with just the perfect amount of grip & slip.

What is Skatepaint?

What is Skatepaint? A polyurethane epoxy component paint designed specifically for wooden skate ramps. Skatepaint protects the skate ramp from the water, snow and skateboard abuse.

How long will Skatelite last?

Skatelite that has been in place at some parks for over three years and is still in good shape. It has weathered severe winters in a several locations without any ill- effects. If properly installed with sufficient substrate, five to ten years seems reasonable.

Does OC Ramps use Skatelite?

Pre-Drill Option: Get your Skatelite pre-drilled and countersunk, for a small convenience fee. This special option is only valid for OC Ramps products (sorry DIY ramp builders). It takes the additional headache and hours of drilling away for a small convenience fee.

How much is a quarter pipe?

13 pieces of 8′ 2X4$352 pieces of (3/4) inch plywood$444 pieces of (3/8) inch plywood$442 pieces of (1/4) inch massonite$208′ 1.5 inch diameter black metal pipe$22

What wood is good for ramps?

The quality of wood dictates how strong and durable the plywood is. For instance, birch has phenomenal surface hardness, therefore birch plywood is one of the best. And a great choice as the riding surface for many indoor ramps.

How thick should plywood be for skate ramp?

For covering the ramp face, we’re going to use two layers of 3/8″ thick plywood and then a final layer of 1/8″ on top. Start by pushing a sheet of 3/8″ tight against the coping and screwing it down to the 2x4s below. Repeat it all the way across the ramp, making cuts as needed until the entire thing is covered.

Do you paint Skatelite?

Skatelite is an incredibly durable solid paper composite material used as a riding surface for extreme sports. … Made with paper that is either post consumer waste recycled or sustainably harvested rapidly renewable paper, Skatelite can be used raw or can be painted, custom printed or customised with vinyls.

What is the best angle for a skate ramp?

One of the most basic types of skateboard ramps are kickers. They essentially consist of a bank or slope at a straight angle. Relative to the ground, a kicker ramp’s surface is typically banked at about 15-30 degrees. There is no curvature to the slope.

What do you use to paint a skateboard?

1. 150-grit sandpaper.
2. 220-grit sandpaper.
3. 40-grit sandpaper.
4. Acrylic aerosol paint.
5. Acrylic aerosol primer.
6. An electric sander.
7. Dust mask.
8. Lacquer thinner (for tacking)

Is Masonite waterproof?

Masonite composite hardboard has a natural moisture resistance. When you install Masonite, the area of the hardboard penetrated by a fastener can absorb moisture. … Lacquer-based waterproofing systems bond to the surface of the Masonite and provide adequate protection against moisture intrusion.

How high is a vert ramp?

The typical height of a vert ramp is 11 ft (3.4 m) to 14 ft (4.3 m) with anywhere from 6 in (150 mm) to 2 ft (0.61 m) of vertical on top.

How much would it cost to build a half pipe?

Using Skatelite for surface$1550Using Massonite for surface$716Using plywood as surface$650Indoor mini halfpipe (see adjustments below)$450

Can I use plywood for a wheelchair ramp?

Can I use plywood for a wheelchair ramp? For an indoor ramp, plywood might work, but when building a wheelchair ramp outdoors, use pressure-treated lumber.

How much should coping stick out?

– it sticks out of the riding surface slightly and up above the top deck slightly, but not too much. About 3/8″ is fine each way, preferably no more than this and no less than 1/4″.

How long do wooden ramps last?

Ramps that are exposed to the elements do not need ‘treated’ wood. Untreated wood will last outdoors for 10-15 years.

What are half pipes made of?

Frame and support for skateboard, BMX, and vert skating half-pipes frequently consist of a 2x6x8″ lumber (actual 38 x 140 x 184 mm) framework sheathed in plywood finished with sheets of masonite or Skatelite. Also, a metal frame finished in wood or metal is sometimes used.