Part NumberSizePoint Style16410001/4-28 x 5”Teks® 514310001/4-28 x 6”Teks® 515900001/4-28 x 8”Teks® 5107000012-24 x 1-1/2”Teks® 5

What are Tek 5 screws used for?

This is why TEK 5 screws are used for fastening into structural steel. As a general rule of thumb, the higher the TEK number (the longer the drill point), the thicker the metal. It is fundamental that the point is high enough on the TEK scale to pierce the metal being drilled into.

What are Tek screws used for?

With a large range of roofing applications, the tek screws are being used for either light or heavy duty screwing, including: Sheet to Steel Screwing, Sheet to Steel, Timber to Steel and Sheet to Sheet. These Self Drilling screws are perfect for fixing Steel Sheet to Steel Purlings.

What size is a tek screw?

Buildex Shed Teks® is a general purpose fastener for fixing metal to metal. It is a 14 gauge screw with a 12 gauge head which outperforms 12 gauge screws in all strength properties.

What does a tek screw look like?

Tek® screws — also called self-tapping fasteners or self-drilling screws — are screws that have a very small carving at the end of their tip, called a drill bit. The drill bit tip creates a small hole by tapping before driving it in.

How much weight can a tek screw hold?

In general, a screw can hold 80-100 pounds. Several factors can impact on the amount of weight the screw can hold. This includes the length of the screw, the type of thread, the quality of the screw, the way it was inserted, and the type of forces that will be acting on it.

How do you measure a tek screw?

The simplest way to remember how to measure length: Length is the distance from the flat part of the head, to the tip or blunt end of the screw or bolt. Almost all screw head types will either be flat on the top or on the bottom. Most screws are flat on the bottom of the head (pan head; round head; truss head, etc….)

Can Tek screws drill through steel?

Tek® 2 through Tek® 5 are used for metal to metal applications, so you can easily use Tek® screws for steel, aluminum, copper and more. Sheet metal Tek® screws are also ideal for fastening sheet metal without the need to pre-drill.

Do Tek screws come loose?

They’re often called metal screws, sheet metal screws, tapping screws, or tapper screws. … The screw will become loose and not thread properly and securely if the hole’s too big. If the hole’s too small, the screw can break or cause the material to split or crack.

What is a Tek 4 screw?

Tek screws, also called self-drilling screws, are self-tapping in the same way as a sheet metal screw. … Tek 4: The #4 point can drill through steel that is 0.25 inches — or 6.35 millimeters — thick. Tek 5: The #5 point can drill through 0.5 inch — or 12.7 millimeters — of steel.

Article first time published on

What size is a #14 TEK screw?

Dia.ThreadDrill Thick.10160.110 – 0.17510240.110 – 0.17512140.035 – 0.08012140.110 – 0.175

Can you use Tek screws in timber?

A tek screw has a drill point and the tip of the screw giving the ability to drill its own hole. Using the correct tek screw for your application will eliminate the need for pre-drilling. The Fastener Factory carries a wide range of tek screws for Steel and Timber.

How do you drill a tek screw?

The best way to use a Tek screw is with an electric screwdriver or drill. You can choose to create a pilot hole, which will ensure your Tek screw goes in straight. Just make sure your pilot hole is slightly smaller than the Tek screw, or else the screw’s grooves won’t be able to catch.

How strong is a tek screw?

Larger Tek screws (No. 3 Tek and above) are strong enough to penetrate 12~20-gauge galvanized steel, as well as 3/8” to ½” (10~12.5 mm) structural steel and can be used on various civil and naval engineering applications.

Can metal Tek screws be used in wood?

You can use metal screws any time you are connecting any material to a metal base, be it plastic, fiberglass, or wood, as these are the most versatile screws. They can also be used to attach hinges, hasps, brackets, and other types of hardware.

Are Tek screws stainless steel?

Stainless Steel Self Drilling Tek Screws or stainless teks are self drilling stainless sheet metal screws with a drill point tip or self tapping tip. Stainless Teks are self drilling screws used in metal without the need of a pre-drilling hole.

Do Tek screws rust?

They are rust-free and anti-corrosive in nature. We all know the power of stainless steel to withstand corrosion and rust. Tek screws are made from high-grade, anti-corrosive material that can withstand rust and corrosion.

What gauge is a 5mm screw?

Diameter (mm)Length (mm)Closest Imperial Size Gauge x Length5mm3010 x 1 1/43510 x 1 3/84010 x 1 1/24510 x 1 3/4

How do I know what size screw I need?

The general rule of thumb is that the screw should enter at least half the thickness of the bottom material, e.g. 3/4″ into a 2 x 4. The other factor is the screw’s diameter, or gauge. Screws come in gauges 2 through 16. Most of the time you’ll want to go with a #8 screw.

What is Panhead screw?

Pan head screws are a common head type of non-countersunk screw head used in wood screws, self-tapping screws, self-drilling screws, and machine screws. They have wide heads, a flat bearing surface, high vertical, chamfered, or curved sides, and a flat or slightly domed top surface with a recessed socket.

What does Tek mean for screws?

Tek screws, also called self-drilling screws, are self-tapping fasteners that have a drill bit end allowing them to be used for screwing materials such as wood and metal together without pre-drilling. Tek screws are best fitted with a high-speed impact drive.

Do you need a pilot hole for self-drilling screws?

While self-tapping screws will tap a hole into a soft material, self-drilling screws are capable of drilling a hole into anything from sheet metal to wood. This key difference is self-drilling screws have a tip like a drill bit, so they do not need a pilot hole.

Are screws stronger in tension or shear?

they also designed for tolerating shear loads. therefore, it is obvious to be stronger in tension as its ductile behavior. In-plane bending also results in a tension to the cross section and consequently is stronger than shear.

What screws do you use with aluminum?

While many people worry that stainless steel fasteners, such as screws, bolts, nuts, or host of other options, won’t work with aluminum due to the risk of galvanic corrosion between the two very different metals, the truth is that stainless steel is the metal of choice for fasteners to secure your aluminum materials.

Is self tapping the same as self piercing?

Self-piercing screws are special fasteners that are designed to pierce light gauge metals and tap their own mating threads as they’re driven into the material. They are essentially the same as self-tapping screws, but with extra-sharp points that allow them to penetrate sheet metal.

Does Loctite work on sheet metal screws?

Self tapping screws and loctite | Engineers Edge Forum | Will loctite prevent self tapping screws from vibrating loose. Assuming the self tapping screws are in sheet metal, I doubt it. There just is not enough screw contact area for the threads or loctite to work.

Can self tapping screws go into steel?

Similar to sheet metal screws, but self-drilling screws have a drill-shaped point to cut through sheet metal or steel which eliminates the need for drilling a pilot hole. We offer the best self-drilling screws that are designed for use in soft steel or other metals.

What is the difference between self tapping and self-drilling screws?

Whichever name is used, a self-tapping screw (or sheet metal screw), is designated as such because it contains form mating threads (thereby “tapping” the threads) in a pre-drilled hole into which they are driven. A self-drilling screw is a type of self-tapping screw that also features a drill point.

What is the longest drywall screw?

Drywall Screw Lengths Screws intended for construction generally range from 1 inch to 8 inches long. The reason is that building materials can have a wide range of thicknesses: from sheet metal to four-by-four posts and even thicker.

What does GRK screws stand for?

oK – stupid question – whats GRK stand for? Green River Killer. BUIC Sep 01, 2007 02:55pm #16. GRK is a brand of high quality screws.

What diameter is a #6 screw?

THREAD DIAMETERSizeNearest FractionInch#47/640.11#51/80.12#69/640.13