PRODUCTFEATURESArnold Maxi EdgeLength: 100 Feet Diameter: 0.095 Inch Shape: Six-SidedOregon Magnum GatorlineLength: 685 Feet Diameter: 0.095 Inch Shape: SquareLoNoizLength: 315 Feet Diameter: 0.130 Inch Shape: Spiral

Is Husqvarna 128LD commercial grade?

The Husqvarna 128LD is designed for the average homeowner with an average-sized yard. It is not designed for commercial use and is not the most powerful model out there. … It is high-quality, as you would expect from Husqvarna.

What is the fuel mixture for a Husqvarna 128ld?

The machine is 2-cycle so a mix of gas and oil (50:1) is required. We recommend using a non-ethanol blended, high octane gas and for example the Husqvarna oil.

How long are trimmer lines?

For light work, such as trimming grass, 0.065″-0.085″ should be sufficient. For thicker grass and weeds, a line in the 0.085″-0.110″ range will get the job done, and for thicker underbrush, anything thicker than 0.110″ will work.

Is trimmer Plus compatible with Husqvarna?

Answer: I have the same question after 6 weeks of waiting for my edger ECA850 attachment to come in. Both the Trimmer plus attachment and my Husqvarna 128ld have male attachment lugs at the connection point. Unfortunately they don’t connect.

Can you put a saw blade on a Husqvarna 128LD?

Husqvarna designed these units without blade capabilities and has never offered a metal blade or adapter to install on this unit. If you feel you need the capabilities of a metal blade you should look at the larger 300 series of trimmers as you can use a grass blade on these.

What size string does a Stihl FS 56 RC take?

It uses dual . 095-inch cutting lines. This Stihl 27.2-cc, gasoline-powered string trimmer has a straight shaft and weighs 12.5 lbs.

How long should the string be on a string trimmer?

Lower powered electric trimmers are normally used with fairly light gage line, about 1.5 mm / 0.06 inch (about 1/16 inch). This is fine for trimming light grass growth around curbs, edges of lawns and flower beds.

How many cc's is a Husqvarna 128LD?

128LD SKU: 952 71 19‑53EngineCylinder displacement28 cm³28 cm³Power output1 hp1 hpMaximum power speed8,000 rpm8,000 rpm

How long should trimmer string last?

It lasted about 2 months, but that was heavy use. If you are doing large weeks, hit a lot of fences, of course it will last less time. I would think with a small city yard, it would last a whole summer.

Article first time published on

What is the mix ratio for 50 to 1?

You want to mix 2.6 ounces of oil to one gallon of gasoline for a 50:1 mixture. If you’re mixing up two gallons of gasoline you will have to mix 5.2 ounces of oil to two gallons of gasoline for a 50:1 mixture.

How long does Husqvarna fuel last?

Purchase only enough fuel to last about 30 days. This helps assure that you are always using fresh, uncontaminated gasoline. For two-stroke engines, only mix enough fuel that will be used within the next 30 days. In order to store the fuel with as little exposure to air as possible, avoid containers with vent caps.

Are Ryobi attachments compatible with Husqvarna?

The Ryobi attachments will fit that machine, they will NOT fit the LDX product. The LDX has a different internal shaft size. Thanks again from the Husqvarna Technical Services Team.

What does trimmer plus fit?

Connects to all attachment-capable Troy-Bilt, Remington, Yard Machines, Craftsman, Bolens, Hyper Tough, Snapper and Cub Cadet string trimmer power heads that accept TrimmerPlus® attachments.

What size string does a Stihl FS 40 use?

It uses dual. 08 or. 095-inch cutting lines on a 15-inch diameter head. This Stihl 27-cc, gas curved shaft string trimmer has a curved shaft and weighs 11.23 lbs.

What is the best brushcutter?

• Stihl FS 131 – BEST CHOICE BRUSH CUTTER. 4.5.
• Husqvarna 336FR – BEST PREMIUM CHOICE. 4.5.
• Stihl FS 55. 4.5.
• Stiga SBC 226 JD. 4.0.
• Husqvarna 525 RX.

How much does a Husqvarna 128ld weight?

This Husqvarna 28-cc, gasoline-powered string trimmer has a straight shaft and weighs 13.6 lbs. It uses dual .

Why does my trimmer line keep coming out?

If this cap is broken or worn out over time, it can malfunction, causing too much line to feed out when you bump it. Depending on its damage, it could be getting hung up as it tries to return, allowing the line to continuously advance. To replace it, simply remove and replace the bump cap with a new one.