A pot filler faucet has a tall, sweeping design that allows large kitchen pots to fit underneath for filling and cleaning. Like all kitchen faucets, the handles may develop a leak from a faulty or worn washer.

What plumbing do you need for a pot filler?

Plumbers will need to find an existing water line that is closest to the location of where your pot filler will be located. Depending on your kitchen’s layout, the water line connected to the back of your refrigerator or to your sink or dishwasher may be used.

How does a pot filler work?

A pot filler is a faucet located on the backsplash over your range or cooktop. Pot Filler Faucets have an articulated arm that enables the tap swing out over the burners so you can fill large stock pots where they will be heated.

How do you replace a pot filler cartridge?

1. Remove the old cartridge.
2. Install the new cartridge.
3. Test for leaks.

Where should a pot filler be placed?

The pot filler should be placed to the right or left of the cooking surface to avoid reaching over the cooking surface to access. The pot filler can be placed above the cooking surface. However, it can get hot from the surface burners or a large pot.

Are pot fillers worth the expense?

Pot fillers can be useful if you cook a lot, if you have a large kitchen, or just if you have the budget to add it to your kitchen. However, they aren’t a necessity, merely a perk.

Should a pot filler have hot or cold water?

A plumber can install a pot filler in a matter of hours. All that’s required is a cold water supply pipe that rises inside the wall behind the stove and stubs out at the proper height.

What is a pot filler tap?

When renovating or upgrading your kitchen, one option you will come across is a pot filler faucet. Also known as a kettle faucet or pasta arm, this single-temperature faucet (usually cold water) is designed so you can fill pots of water directly on the stove rather than in the sink.

Can you flip a pot filler?

No, there is no way to flip the spout. The faucet spout would be facing the ceiling. Do you find this helpful?

Are pot fillers hot water?

Pot Fillers You can run either a hot water line or a cold one, they don’t have a mixer and therefore can only dispense the water they are hooked to. They can be installed on the wall or on your countertop.

Article first time published on

Does a pot filler need to be centered?

The pot filler faucet is easily unfolded from its central position to reach all of the burners and even to the edges of both sides. Off-center placement may be a better choice if there is a particular high-heat burner that is almost exclusively used for boiling water and large pots of soup.

Can you have a pot filler under a microwave?

The problem with over-the-range microwave is that they become sponges for grease. If you want a specialty feature, like a pot filler, you probably won‘t have room between your stovetop and hanging microwave. If you have children, it may be difficult for them to access the microwave that high up.

Why do pot fillers have 2 handles?

Many pot fillers come with two handles, so one can turn on the water at the source and then adjust it as needed over the pot, but one handle works just about as well, if with a little more reaching.

Does pot filler have to match faucet?

(like, a very modern faucet shouldn’t be matched with a traditional pot filler….. they both should match your kitchen.) You should be able to find a pot filler to match your faucet, even if it’s a different brand.

Why do pot fillers have two valves?

Make sure to consider the height of your cooktop as well as your tallest pot when determining the location of the faucet. It’s also recommended to get a faucet with two valves. (The second valve helps to control and minimize damage should the faucet ever get a leak.)

Why is there a faucet above the stove?

The kettle faucet mounted over a stove swings out, extending on a long, jointed arm. The faucet can be used to fill pots with water directly over the stove. … These swinging faucets are cold-water faucets and save you the trouble of carrying heavy pots filled with water from the sink to the stove.

How much does a pot filler cost to install?

The faucets themselves run from about $150 to well over $1,000. However, a basic, simply designed model should be more than adequate and cost around $250. The installation including materials, should run about $75 for a remodel or around $310 for an existing kitchen, depending upon the complexity of the project.

What's the thing above the stove called?

A kitchen hood, exhaust hood, or range hood is a device containing a mechanical fan that hangs above the stove or cooktop in the kitchen. It removes airborne grease, combustion products, fumes, smoke, heat, and steam from the air by evacuation of the air and filtration.

Does Kraus make pot fillers?

The versatile design includes a pre-rinse sprayer for blasting away tough food residue and a rotating pot filler that allows you to quickly fill up your largest pots and tallest pitchers.